The Pressure Buildup Well Test Analysis considering Stress Sensitivity Effect for Deepwater Composite Gas Reservoir with High Temperature and Pressure

Abstract

Some deepwater gas reservoirs with high temperature and pressure have obvious stress sensitivity effect resulting in difficulty in well test interpretations. The influence of stress sensitivity effect on the pressure drawdown well test is discussed in many papers. However, the influence on the pressure buildup well test is barely discussed. For practices in oilfields, the quality of pressure data from the drawdown stage of well test is poor due to the influence of production fluctuation. Thus, the pressure data from the buildup stage is used for well test interpretations in most cases. In order to analyze the influence of stress sensitivity effect on the pressure buildup well test, this paper establishes a composite gas reservoir pressure buildup well test model considering the stress sensitivity effect and the hysteresis effect. Numerical solutions to both pressure drawdown and buildup well test models are obtained by the numerical differentiation method. The numerical solutions are verified by comparing with analytical solutions and the homogeneous gas reservoir well test solution. Then, the differences between pressure drawdown and buildup well test curves considering the stress sensitivity effect are compared. The parameter sensitivity analysis is conducted. Compared with the conventional well test curve, the pressure derivative curve of pressure drawdown well test considering the stress sensitivity effect deviates upward from the 0.5 horizontal line at the inner zone radial flow stage, while it deviates upward from the M/2 (mobility ratio/2) horizontal line at the outer zone radial flow stage. However, for the pressure buildup well test curve considering the stress sensitivity effect, the pressure derivative curve gradually descends to the 0.5 horizontal line at the inner zone radial flow stage, while it descends to the M/2 (mobility ratio/2) horizontal line at the outer zone radial flow stage. The pressure derivative curve of pressure buildup well test considering the hysteresis effect is higher than the curve without considering the hysteresis effect, because the permeability cannot be recovered to its original value in the buildup stage after considering the hysteresis effect. Meanwhile, skin factor and mobility ratio have different effects on pressure drawdown and buildup well test curves. Based on the model, a well test interpretation case from a deepwater gas reservoir with high temperature and pressure is studied. The result indicates that the accuracy of the interpretation is improved after considering the stress sensitivity effect, and the skin factor will be exaggerated without considering the stress sensitivity effect.