Ultrasound-assisted starch hydrolyzing by alpha-amylase: Implementation of computational fluid dynamics, acoustic field determination, and rheology modeling

Abstract

The study aimed to optimize the ultrasonic-assisted modification (UAM) of corn and potato starch by assessing the influence of ultrasound geometry, power, and frequency on the fluid flow for sonicated starch to achieve porous starch with a higher degree of hydrolyzing by α-amylase. This assessment was conducted through mathematical modeling and 3D computational fluid dynamics (CFD) simulations. The ultrasonic pressure field is determined by the solution of the non-linear Westervelt equation in the frequency domain. Then, the obtained field is utilized to simulate the dissipated power and flow field characteristics. According to the results obtained from the Rapid Visco Analyzer (RVA), it was observed that the peak and final viscosity of hydrolyzed sonicated starch were less than hydrolyzed native starch. This decrease in viscosity indicates a breakdown of the starch structure, leading to a more fluid-like consistency. The shear rate and shear stress data are used for rheology modeling. The fluid's viscosity is represented based on three models of Herschel–Bulkley, Casson, and Power law (Ostwald–de Waele). The magnitude of yield shear stress at low shear rates, the shear-thinning behavior, and the nearly Newtonian fluid nature at high shear rates are extracted from the viscosity models. The surfaces of the starch granules were analyzed using scanning electron microscopy (SEM) revealed that sonication treatments caused damage, cracks, and porosity on the surfaces of the starch granules which were prone to amylolytic enzymes. This indicates that the structural integrity of the granules was compromised and facilitated enzyme penetration. This study proposes that ultrasonication can be utilized to produce damaged starch, which is susceptible to hydrolysis by α-amylase. This approach holds the potential for reducing enzyme consumption in various industries.

Keywords

• Herschel–Bulkley model
• Casson model
• Power law model
• CFD simulation
• Rheology