A 4 × 4 Array of Complementary Split-Ring Resonators for Label-Free Dielectric Spectroscopy

Abstract

In this study, complementary split-ring resonator (CSRR) metamaterial structures are proposed for label-free dielectric spectroscopy of liquids in microplates. This novel combination of an array of sensors and microplates is readily scalable and thus offers a great potential for non-invasive, rapid, and label-free dielectric spectroscopy of liquids in large microplate arrays. The proposed array of sensors on a printed circuit board consists of a microstrip line coupled to four CSRRs in cascade with resonant frequencies ranging from 7 to 10 GHz, spaced around 1 GHz. The microwells were manufactured and bonded to the CSRR using polydimethylsiloxane, whose resonant frequency is dependent on a complex relative permittivity of the liquid loaded in the microwell. The individual microstrip lines with CSRRs were interconnected to the measurement equipment using two electronically controllable microwave switches, which enables microwave measurements of the 4 × 4 CSRR array using only a two-port measurement system. The 4 × 4 microwell sensor arrays were calibrated and evaluated using water-ethanol mixtures with different ethanol concentrations. The proposed measurement setup offers comparable results to ones obtained using a dielectric probe, confirming the potential of the planar sensor array for large-scale microplate experiments.

Keywords

• complementary split ring resonators
• metamaterials
• dielectric spectroscopy
• complex permittivity
• sensor array
• resonator