Algorithms for estimating equivalent resistances of in-plant electrical networks

Abstract

THE PURPOSE. Investigation of the degree of influence of the characteristics of in- plant electrical networks on the reliability of the results in the algorithms for estimating equivalent resistances. METHODS. When solving this problem, a study of the radial power supply scheme of the tool shop section was carried out with the calculation and modeling of equivalent and reference values of the circuit resistances. Algorithms and methods for estimating the values of equivalent resistances have been developed, taking into account the main technical characteristics of in-plant networks.RESULTS. The data of calculations of the equivalent resistance values of the circuits with an assessment of the heating factor of the conductors and the resistance factor of the contact devices are analyzed. The proportions of the influence of the resistances of the contact equipment and lines, taking into account the number of electric power receivers connected to the power point, on the value of the equivalent resistances of the circuit are revealed. CONCLUSION. The article develops algorithms for estimating the values of equivalent resistances of in-plant power supply circuits. Nomograms are presented that take into account the number and length of the circuit lines with the allocation of the zone of accounting for the resistances of contact equipment in the equivalent resistances of the circuits. The obtained algorithms and results are recommended to be used to clarify the amount of power and electrical energy losses in the intra- factory networks, which will increase the reliability of calculations.

Keywords

• algorithms
• models
• in-plant circuits
• equivalent resistance
• equipment characteristics