Discharge coefficient of vertical sluice gates with broad crested weir under free-submerged orifice flows using best subset regression

Abstract

Accurate calculation of flow discharge for sluice gates is essential in irrigation, water supply, and structure safety. The measurement of discharge with the requirement of distinguishing flow regimes is not conducive to application. In this study, a novel approach that considers both free and submerged flow was proposed. The energy–momentum method was employed to derive the coefficient of discharge. Subsequently, the discharge coefficient was determined through the experiment which was performed on the physical model of a vertical sluice gate with a broad-crested weir. Feature engineering, incorporating dimensional analysis, feature construction, and correlation-based selection were performed. The best subset regression method was employed to develop regression equations of the discharge coefficient with the generated features. The derived formula was applied to compute the discharge coefficient in the vertical sluice gate and determine the flow discharge. The accuracy of adopted method was assessed by comparing it with recent studies on submerged flow, and the results demonstrate that the developed approach achieves a high level of accuracy in calculating flow discharge. The coefficient of determination for the calculated flow rate is 0.993, and the root mean square percentage error is 5.04%. HIGHLIGHTS The feature combination with efficient interpretability of free-submerged flow discharge coefficient was proposed.; The computational equation applicable to free-submerged flow regimes based on the EM method was established with high accuracy.; The process of feature selection and calculation is not complicated and has potential for automated calibration.;

Keywords

• best subset regression
• broad-crested weir
• discharge coefficient
• flow discharge calculation
• free-submerged orifice flow
• vertical sluice gate