Analysis on influencing factors and energy saving potential of photovoltaic curtain wall preheating fresh air system in severe cold area

Abstract

In the general building air conditioning load, the fresh air load accounts for more than 30%, especially in the severe cold areas in the north, with long winter and large indoor and outdoor temperature difference, the fresh air heat load will account for a larger proportion in the air conditioning system load. Making full use of renewable energy can effectively reduce building energy consumption. In this paper, the air flow field distribution in the ventilation duct of photovoltaic curtain wall is numerically simulated by fluent simulation software, and the air distribution form and temperature field distribution in the system cavity under different ambient temperature, cavity thickness and tuyere position are analyzed and compared, so as to obtain the influence of different influencing factors on the performance of the fresh air preheating system, and combine the photovoltaic curtain wall preheating fresh air system and electric heating system to explore its energy-saving potential. The results show that when the cavity thickness is greater than 400mm, the reduction range of photovoltaic curtain wall temperature becomes smaller, and the overall temperature distribution of the cavity tends to be uniform. When the ambient temperature is different, with the increase of ambient temperature, after the fresh air passes through the photovoltaic curtain wall preheating system, the temperature difference at the inlet and outlet of the air flow channel decreases, and the maximum temperature difference decreases from 4.6k to 3.4K.The combination of photovoltaic curtain wall and electric heating is used to preheat the fresh air. Compared with the traditional method, the same fresh air load is treated, and the energy-saving rate is 60% ∼ 70%. It shows that using photovoltaic curtain wall to preheat the fresh air can achieve better results, which provides guidance for putting forward more appropriate, economic and energy-saving design schemes in the project.