A Fundamental Study on the Preparation of Sodium Tungstate from Wolframite via the Smelting Process

Abstract

Tungsten is a high-value resource with a wide range of applications. The tungsten metal is produced via ammonium paratungstate, which is a multi-stage process including leaching, conversion, precipitation, calcination, and reduction. A short process to produce tungsten metal from the electrolysis of molten sodium tungstate has been demonstrated. However, sodium tungstate cannot be directly produced from wolframite in the conventional hydrometallurgical process. There was no information reported in the literature on producing sodium tungstate directly from tungsten concentrates. The present study proposed a simple and low-cost process to produce sodium tungstate by high-temperature processing of wolframite. The mixtures of wolframite, sodium carbonate, and silica were melted in air between 1100 and 1300 °C. High-density sodium tungstate was easily separated from the immiscible slag, which contained all impurities from wolframite, flux, excess sodium oxide, and dissolved tungsten oxide. The slag was further water leached to recover sodium tungstate in the solution. Effects of Na2CO3/Ore and SiO2/Ore ratios, temperature, and reaction time on the recovery of tungstate and the purity of sodium tungstate were systematically studied. Sodium tungstate containing over 78% WO3 was produced in the smelting process, which is suitable for the electrolysis process. The experimental results will provide a theoretical basis for the direct production of sodium tungstate from wolframite. The compositions of the WO3-containing slags and sodium tungstate reported in the present study fill the knowledge gap of the tungsten-containing thermodynamic database. Further studies to use complex and low-grade tungsten concentrates to produce sodium tungstate are underway.

Keywords

• wolframite
• smelting process
• sodium tungstate
• immiscible
• slag