Effect of Cyclic Lateral Loading on the Compaction Behaviour of Waste Rock Backfill Materials in Coal Mines

Abstract

Crushed waste rock (CWR) can be used as backfill for goafs allowing disposal of solid waste and control of surface subsidence. Waste rocks for backfilling (WRBs) have a certain density before use if cyclic lateral loads are applied to CWRs, therefore, by employing a self-designed bidirectional loading test system for granular materials, the influence of the number of lateral loading cycles on the compaction characteristics of WRBs was explored. Through testing, changes in mechanical parameters of WRBs during lateral and axial loading were attained to analyse the influence of lateral loading on lateral strain, axial strain, porosity, and lateral pressure coefficient during their compaction. The test results showed that: (1) the lateral loading exerted a significant influence on the porosity, strain, and lateral pressure coefficient of crushed WRBs during lateral and axial loading; (2) under lateral load, the more cycles of lateral loading applied, the greater the lateral strain and the reduction in lateral porosity of samples; (3) during axial loading, for samples subjected to multiple cycles of lateral loading, owing to the porosity of WRBs having been decreased in advance to improve their density, the final axial strain was low; (4) after compaction, the particle size distributions of CWR samples after different numbers of cycles (1, 3, 5 and 7) of lateral loading all shifted upwards compared with those obtained before compaction, implying that rock particles were crushed. However, the number of cycles of lateral load did not affect crushing of particles before, and after, compaction.

Keywords

• green mining
• waste rock
• backfill mining
• compaction behaviour
• particle breakage