Applied Sciences (Nov 2023)
Study of the Reasonable Acquisition Frequency Evaluation Method of Midspan Deflection of Medium- and Small-Span Beam Bridges
Abstract
The objective of this study is to further promote and apply the structural monitoring system to medium and small bridges, given the relative delays in scientific research, technical specifications, and engineering practice for the safety monitoring of small and medium-span girder bridges, as well as the relative simplicity of the structural system of these bridges, their well-defined forces, and the relatively large proportion of live load responses during operation. These concepts are proposed based on the evaluation method of live loading (As therefore, this paper suggests the notion of sensor acquisition frequency and appropriate acquisition frequency based on the live load assessment method and the fundamental reliability theory). Based on the time-history curve depicting the midspan deflection response of the vehicle-bridge coupling system, the frequency domain analysis reveals that the power spectrum at −3 dB corresponds to the response cutoff frequency. Significantly, the cutoff frequency mentioned is double the acquisition frequency considered suitable for the study. Based on the definition of a quasi-static response, it can be deduced that the velocity of a load does not exert any influence on the quasi-static response of a bridge structure. As a result, the derivation of the components related to the midspan deflection of a bridge’s quasi-static response is presented, together with a recommended set of methodological guidelines for the extraction of finite elements. This study introduces a novel approach for determining the cutoff frequency of the structural response by utilizing the characteristics of amplitude spectrum estimation and power spectrum estimation in frequency domain analysis. The cutoff frequency of the signal is determined by analyzing the amplitude-frequency curve of the power spectrum. Subsequently, the probability density function of the original time-history curve data is estimated based on the amplitude spectrum. Finally, reliability analysis is conducted by calculating the ratio of the amplitude spectrum area of the signal obtained through a reasonable acquisition frequency to the area of the amplitude spectrum function of the original signal. This analysis verifies the reliability of the proposed method for determining the midspan deflection acquisition frequency.
Keywords
