Joining of 304 stainless steel to PET by semiconductor laser conduction welding

Abstract

304 stainless steel (304SS) and polyethylene terephthalate (PET) were lapped joined by laser conduction welding using a semiconductor laser with a flat-top thermal distribution. Experimental investigation and numerical simulation were conducted to analyze the weld morphology, pores distribution, interfacial microstructure, temperature field, joint strength and fracture behavior of the laser dissimilar joints. Because of the uniform thermal distribution of the laser, the decomposition of the PET base material was well controlled with pore-free joints obtaining at the welding speed over 25 mm/s. Besides, a compound layer was generated at the interface between 304SS and PET with its thickness decreased when the welding speed increased. Chemical reactions and mechanical anchoring were both observed at the interface suggesting a dual joining mechanism. The joint fracture load first increased then decreased with the increased welding speed. Besides, a ductile to brittle failure transition was clearly seen. The underlying mechanism was also discussed.

Keywords

• 304SS/PET dissimilar materials
• Laser welding
• Numerical simulation
• Bubbles
• Mechanical properties