Assessing the Efficiency of Ion Exchange Resins for the Recovery of Scandium from Sulfuric Acid Leaching Solutions

Abstract

Scandium, a valuable element with restricted production sources mainly situated in China and Russia, is typically obtained as a by-product during the production of various materials. As the demand for scandium grows in the expanding aluminum and fuel cell industries, and with significant investments in rare earth mining in the USA and Australia, there is a need to explore alternative recovery sources. This research investigates the recovery of scandium from an acid pregnant leaching solution using ion exchange resins. The pregnant leaching solution was obtained after the leaching of bauxite residue with sulfuric acid. Commercial resins with different functional groups were tested for their performance in scandium extraction. In addition, the co-adsorption of impurities, such as iron and titanium, was studied. The feed solution consisted of 12.7 mg/L Sc and main impurities of 272 mg/L Fe and 33.6 mg/L Ti and was pretreated before the ion exchange process by acidification with sulfuric acid and iron powder addition to suppress silica gel formation and minimize the Fe(III) content in the solution accordingly. Among the tested resins, a D2EHPA-impregnated resin had high selectivity for Sc towards Ti, while a monophosphonic resin was also a promising option since it had a higher capacity for Sc but co-extracted Ti. These findings offer promising opportunities for the recovery of scandium from acid leaching solutions and could contribute to addressing the growing demand for this valuable element.

Keywords

• D₂EHPA-impregnated resin
• monophosphonic resin
• sulfuric acid
• leaching
• scandium
• adsorption isotherms