Underground Space (Feb 2024)
Investigation of cracking mechanism of the first tunnel lining during double-arch tunnel construction
Abstract
To solve the engineering problem of the first tunnel lining cracking caused by the second tunnel construction of double-arch highway tunnels, a research method combining distributed optical-fibre monitoring, inversion analysis and numerical simulation that can reflect lining cracking was presented. Optical fibres were laid on opposite sides of the steel arches inside the first tunnel lining. Embedded optical-fibre monitoring was conducted continuously during the second tunnel driving. Based on the fibre-optic strain profile, the lining cracking was deduced and warned in time. The mechanical behaviour of the steel arch was investigated by the inversion analysis, which took into consideration the integrated impact of axial force and flexural moment. A two-dimensional (2D) load-structure method–based numerical model was established, considering the influence of different load distributions in each construction condition. The total strain rotating crack constitutive model was applied to reflect the cracking behaviour of concrete lining in the simulation, and the model was calibrated and verified in the laboratory. Comparative analysis between the simulated strain distribution and the distributed optical-fibre monitoring results was carried out. The deformation mode and crack distribution of the lining were analysed. The cracking mechanism was explained. Specifically, the second tunnel construction led to the loading at the top of the middle partition wall and the release of rock pressure in the first tunnel. Under these load changes, the secondary lining of the first tunnel cracked on the inner side of the top of the middle partition wall owing to tension, and compression-bending failure occurred near the right arch foot. Finally, the influence of the parameters on the lining force was analysed, and a construction optimisation scheme was proposed.
