A single‐inductor self‐powered SECE interface circuit for dynamic load multi‐PZTs energy harvesting

Abstract

Abstract There is always considerable inconsistency between the input energy and the amount of the energy required for the load in piezoelectric transducers (PZTs) energy harvesting interface circuits that often degrades the harvesting performance of most of them. Multiple piezoelectric transducers (multi‐PZTs) vibration scavenging may address this issue by enhancing input power and, consequently, environmental adaptability and reliability. The proposed interface circuit may extract energy from a PZT array regardless of each PZT amplitude, frequency, or phase, even under dynamic or heavy load circumstances. The circuit is thoroughly simulated by LTSpice software and evaluated by post‐simulation calculations and discussions. The simulation findings demonstrate that the proposed self‐powered (SP) SECE‐based multi‐PZT EH interface circuit, named MI‐SP‐SECE, can extract a peak power of 12.8 µW from three PZTs in the provided actual scenario at a dynamic load regime with a simulated excitation of 1.5 g and 50 Hz. The proposed circuit's energy integration and harvesting efficiencies are 75% and 85%, respectively. It can achieve a power enhancement of 2.8× relative to a multi‐input full‐bridge rectifier. In addition, the proposed circuit is scalable effectively because it requires just one inductor component.

Keywords

• AC‐DC power convertors
• energy harvesting
• piezoelectric transducers