Effect of the Percentage of MUF Adhesive Coverage on Shear Strength When Bonding Different Wood Species

Abstract

Due to climate changes, it is necessary to consider the use of other wood species to replace currently used woods. This work deals with the determination of the shear strength of bonded veneers (eight European wood species: spruce, larch, pine, beech, oak, poplar, birch, and alder) with Silekol® 311 melamine-urea-formaldehyde adhesive (MUF) with a variable coverage on the surface of the samples: 10, 15, 20, 25, 30, 50, 75, and 100%. The Automated Bonding Evaluation System (ABES) was used to evaluate and compare adhesive bond strengths. The larch, beech, and oak samples exhibited greater single-lap shear strength than the control samples from spruce. There was no statistically significant difference in shear strength regarding the adhesive coverage from 100% to 20% on the surface of the samples, for almost all wood species. The results of the project provide basic information about the bonding strengths with different coverage in the adhesive layer, comparing non-commonly used wood species in wood-based composites such as oriented strand board and particleboard.

Keywords

• wood-based panels
• lap shear strength
• percentage of adhesive coverage
• melamine-urea-formaldehyde adhesive
• strand boards
• automated bonding evaluation system (abes)