Effects of pulsed frequency on the microstructure characteristics and properties of Ti6Al4Vlaser melting deposition additive manufacturing parts

Abstract

Laser melting deposition–produced Ti6Al4V additive manufacturingparts tend to manifest as coarse columnar grains. This paper optimises the laser pulse frequency to manage the microstructuralcharacteristics of Ti6Al4V parts and enhance their tensile properties and corrosion resistance. A fiber laser processing equipment with a laser power of 1200 W and a spot diameter of 2.0 mm was employed for all experiments, which provides pulsed lasers at 4, 40, 400, and 4000 Hz at a scanning speed of 8 mm/s and a duty cycle of 95 % for comparative research.The findings demonstrated that increasing the pulse frequency improved the deposition efficiency.An appropriate pulse frequency could promote the refinement and columnar-to-equiaxed transition (CET) of primary β grains.At 400 Hz, the Ti6Al4V-deposited parts yielded refined equiaxed grains.The average grain size in the middle of the sample was about 206.8 μm,and the microstructure mainly comprised fine α-laths in a lamellar structure, which yielded the best overall performance of the parts, with the ultimate tensile strength and elongation reaching 1083 MPa and 4.09 %, respectively.Therefore, improvingthe structural properties of partsby regulating the deposition process, which is conducive to the online regulation of the forming quality of laser deposition parts, is an effective and feasible approach.

Keywords

• LMD
• Ti6Al4V
• Pulse laser frequency
• Mechanical properties
• Corrosion resistance