Implementation of Flat Gain Broadband Power Amplifier With Impedance Rotation Compensation

Abstract

The conventional broadband impedance matching network in low-pass structure cannot present adequate broadband impedance rotation for the optimum broadband operation of the power amplifier (PA), resulting in performance variations and degradations. The underlying constraint is the phenomenon of opposite impedance rotation. Against such a backdrop, this paper presents a methodology using the band-pass topology to compensate the frequency-variable response of the PA. The CGH40010F from Cree is used to verify the effectiveness of this compensation method. The experimental results are in good agreement with the simulation. The proposed PA yields good gain flatness (±0.5 dB), input/output return loss (>13 dB), and high power added efficiency (>60 %) over the band from 1.7 to 2.7 GHz. After digital predistortion, the measured adjacent channel power ratio is about -55 and -50 dBc at ±5 and ±10 MHz offset when the PA is driven by 5- and 10-MHz WCDMA signals at 6.5 ~ 7 dB power back-off.

Keywords

• Band-pass matching network
• broadband impedance rotation
• broadband reactive matching
• power amplifier
• synthesis method