On the discretization of river networks for large scale hydrologic-hydrodynamic models

Abstract

ABSTRACT The discretization of river networks is a critical step for computing flow routing in hydrological models. However, when it comes to more complex hydrologic-hydrodynamic models, adaptations in the spatial representation of model calculation units are further required to allow cost-effective simulations, especially for large scale applications. The objective of this paper is to assess the impacts of river discretization on simulated discharge, water levels and numerical stability of a catchment-based hydrologic-hydrodynamic model, using a fixed river length (Δx) segmentation method. The case study was the Purus river basin, a sub-basin of the Amazon, which covers an area that accounts for rapid response upstream reaches to downstream floodplain rivers. Results indicate that the maximum and minimum discharges are less affected by the adopted Δx (reach-length), whereas water levels are more influenced by this selection. It is showed that for the explicit local inertial one-dimensional routing, Δx and the α parameter of CFL (Courant-Friedrichs-Lewy) condition must be carefully chosen to avoid mass balance errors. Additionally, a simple Froude number-based flow limiter to avoid numerical issues is proposed and tested.

Keywords

• Hydrological modelling
• Hydrodynamic modelling
• Spatial discretization
• Local inertia
• River reach
• MGB model