Factors Affecting the Efficiency of Hydrophobic Coatings—Experience from Application on Sandstone

Abstract

Protecting stone on facades or exterior art works from deterioration is primarily about protecting them from rainwater. Hydrophobic coatings are widely used for this purpose. Here, two factors affecting the long-term efficiency of some coatings applied on stones were investigated: the number of coating layers and the curing time after their application. Tests of water absorption by capillarity, absorption at total immersion in water, and a visual check of the penetration depth have been carried out. The coating’s efficiency coefficient Cef was defined as the ratio of the maximum water absorption of a treated sample to an untreated one. Two commercial silicon-based coatings were applied on the highly porous Hořice sandstone alternatively. Curing times of 2 days vs. 2 weeks, and 2 coating layers vs. 3 layers were compared. The experiments showed that the coating’s efficiency is affected more by the curing time than by the number of applied coating layers. The curing time of 2 days after coating’s application is too short, but 2 weeks proved to be sufficient for both tested coatings. There was no big difference regarding the number of coating layers; two layers seem to be sufficient if a long rain-free curing time can be guaranteed.

Keywords

• sandstone
• hydrophobic coatings’ efficiency
• curing time
• number of coat layers
• penetration depth
• water absorption tests