Durability of working bodies of soil-cultivating machines strengthened by composite electrolytic coatings (CEC)

Abstract

The task of this work is to find the optimal ratio between the size of the particles of silicon carbide and their volumetric content in the nickel matrix to provide maximum characteristics of strength and wear resistance of the working bodies of soil-processing machines. The article investigates the processes of forming complex electrolytic coatings (CEC) on a nickel basis with particles of the filler of various sizes of silicon carbide (SIC). It has been established that the formation of a sicle size sicle and SiC5 is carried out on a vertical, and all other particles in a horizontal cathode. The volumetric content of SICnano and SiC5 particles in nickel reaches a maximum of about 10%, and SiC100 – 46 %. Cap with particle size 28/20 and 50/40 μm allow you to get the most wear-resistant coatings. In this case, the coating with particles 28/20 μm have higher wear resistance, but coating with particles 50/40 μm are more technological when they are formed. The size of the filler particles has a significant effect on the tribological characteristics of the CEP, namely wear resistance and friction coefficient. It has been established that the highest wear resistance and the smallest friction coefficients are characterized by coatings having as a filler of fractions 28/20 and 50/40 μm. Tribological studies show the promise and efficiency of the CEP to increase the wear resistance of the working bodies of soil-cultivating machines.

Keywords

• ground-making machines
• composite electrolytic coatings (cec)
• durability