Lithology-Controlled Hydrodynamic Behaviour of a Fractured Sandstone–Claystone Body in a Radioactive Waste Repository Site, SW Hungary

Abstract

The fracture network modelling and hydrogeological assessment were performed in an 845 m deep borehole of the potential high-level waste repository formation and its caprock. The geometry of the fracture network was simulated using the discrete fracture network (DFN) modelling method, which is based on the geometric characteristics of the individual fractures. The hydrogeological evaluation was based on changes in porosity and permeability along the borehole using flow zone indicator (FZI) values that denote hydraulic flow units (HFU) within the rock body. Fracture network characteristics and hydrogeological features are mainly determined by the wellbore lithology, which can be divided into three zones. The sandstone body was intersected in the upper 300 m of the borehole, which forms a single HFU. The second zone was developed along with the transition zone between the sandstone and the underlying claystone bodies. Here the predominant rock type is claystone, but the characteristics of the fracture network are distinctly different from the deeper parts of this rock body. Below 400 m is the third zone, where distinct and extensive HFU-s could not form, probably due to different water–rock interaction processes that could have changed the porosity and permeability from point to point in the claystone.

Keywords

• DFN modelling
• fracture network
• fracture aperture
• flow zone indicator
• high-level radioactive waste repository
• Boda Claystone Formation