Atmosphere (Oct 2023)
Analysis of Parameters Influencing the Formation of Particles during the Braking Process: Experimental Approach
Abstract
Knowing and understanding the parameters influencing the concentration of particles created by brake wear, as one of the main contributors to non-exhaust emissions from vehicles, is important for the further development of systems on vehicles to reduce the concentration of particles, and also for further research in the field of developing new friction pairs. In this research, a brake inertial dynamometer was used to measure brake particles, and four different brake pads were examined. Based on a previous review of the applied tests and driving cycles, the braking parameters were determined, i.e., the initial simulated speed of the vehicle, the load of one-quarter of the vehicle, and the brake pressure. The ambient temperature, air humidity, coefficient of friction between friction pairs, deceleration, and braking time can have an influence depending on the brake pad. Further, during the measurement, the temperatures of the brake pads were also measured, where the initial temperature of the brake pads was always the same. In order to process the data, several methods were used, including the presentation of the obtained results in a time domain, the application of the Taguchi design of the experiment with the analysis of the parameters, and a correlation analysis using the Pearson and Spearman correlation coefficients. In this research, the authors concluded that the influences of the parameters primarily depend on the applied brake pads. The vehicle speed turned out to have a large influence in all cases, as did the load, i.e., the influence of the vehicle weight (indirectly through the kinetic energy of the vehicle). In this case, the pressure showed less influence on the particle concentration. An important braking parameter that has a significant impact on the concentrations of PM2.5 and PM10 particles is the final temperature of the brake pads.
Keywords
