Optimization of Forming Parameters in Incremental Sheet Forming of AA3003-H18 Sheets Using Taguchi Method

Abstract

The surface finish is an important characteristic in the incremental sheet forming (ISF) process and is often influenced by numerous factors within the forming process. Therefore, this research was aimed at identifying the optimal forming parameters through the Taguchi method to produce high-quality formed products. The forming tool radius, spindle speed, vertical step increment, and feed rate were chosen as forming parameters in the experimental design, with surface roughness as the response variable. Taguchi L16 orthogonal array design and analysis of variance (ANOVA) test were used to identify the parameter’s optimal settings and examine the statistically significant parameters on the response, respectively. Results confirmed that a significant reduction in surface roughness occurred with a drop in vertical step size and an increase in feed rate. In detail, the vertical step size has the most significant influence on the surface roughness, followed by the feed rate and the forming tool radius. In conclusion, the optimum level settings were obtained: forming tool radius at level 3, spindle speed at level 1, vertical step size at level 1, and feed rate at level 4. Additionally, confirmation experiment results based on the optimal settings indicated a good agreement against the experimental observation. Further, the response surface methodology (RSM) was also exploited to devise a mathematical model for predicting the surface roughness. The results comparison confirmed that both techniques could effectively improvise the surface finish.

Keywords

• incremental sheet forming
• surface finish
• Taguchi L16 orthogonal array
• surface roughness
• ANOVA
• response surface methodology