Mechanochemical synthesis of CaO•ZnO.K2CO3 catalyst: Characterization and activity for methanolysis of sunflower oil

Abstract

The goal of this study was to prepare CaO.ZnO catalyst which contain small amount of K2CO3 and analyze its activity for biodiesel synthesis. Catalyst was prepared using the following procedure: CaO and ZnO (molar ratio of 1:2), water and K2CO3 (in various amounts) were mechanochemically treated and after milling heated at 700 oC in air atmosphere for obtaining mixed CaO•ZnO/xK2CO3 oxides (x = 0, 1, 2 and 4; mole of K2CO3 per 10 mole of CaO). All the samples were characterized by X-ray diffraction (XRD), inductively coupled plasma (ICP), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), infrared spectroscopy (FTIR), scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS), particle size laser diffraction (PSLD) distribution, solubility measurement of Ca, Zn and K ions in methanol as well as by determination of their alkalinity (Hammett indicator method). Prepared CaO•ZnO/xK2CO3 composite powders were tested as catalysts for methanolysis of sunflower oil at 70ºC using molar ratio of sunflower oil to methanol of 1:10 and with 2 mas% of catalyst based on oil weight. The presence of K2CO3 in prepared samples was found to increase the activity of catalyst, and that such effect is caused by homogeneous-heterogeneous catalysis of biodiesel synthesis. [Projekat Ministarstva nauke Republike Srbije, br. 45001]

Keywords

• Mechanochemical synthesis
• CaO.ZnO.K2CO3
• Mixed oxides
• Biodiesel synthesis