Synthesis, Characterization, and Application of Co-Al-Zn Layered Double Hydroxide/Hydrochar Composite for Simultaneous Removal of Cationic and Anionic Dyes

Abstract

Decontamination of organic dyes from wastewater requires efficient and compatible materials that must be able to remove dyes with different charges at the same time. In this study, composites of layered double hydroxide (LDH) and hydrochar (HC) were prepared and tested for use as general-purpose sorbents for the simultaneous removal of cationic and anionic dyes (i.e., methylene blue (MB), methyl orange (MO), and reactive yellow (RY)). Characterization studies reveal that the surface functional groups on composites are –OH, NO3, M–O bonds. It was observed that crystallinity of LDH decreased with an increasing amount of HC. Preliminary experiments showed that the dyes (i.e., MB, MO, and RY) were well removed simultaneously onto the composite with HC (2.0 g HC/prepared composite). This composite was selected for more experiments, and the adsorption efficiency was optimized by the multivariate technique using the response surface methodology (RSM). Removal efficiency of 100% was obtained for all three dyes with an adsorption capacity of 243, 5.3, and 16.3 µmol g−1 for MB, MO, and RY, respectively. Elovich’s initial intake rates (α) were 4,272, 441, and 99.5 mg g−1 min−1 for RY, MB, and MO, respectively. Data fitted in various models suggested second-order multiplex kinetics, where the surface heterogeneity response was sorbate dependent.