Open Engineering (Nov 2020)

Behavior of non-reinforced and reinforced green mortar with fibers

  • Thanon Dawood Eethar,
  • Hani Abdullah Mafaz

DOI
https://doi.org/10.1515/eng-2021-0006
Journal volume & issue
Vol. 11, no. 1
pp. 67 – 84

Abstract

Read online

The behavior of non-reinforced green mortar with fibers has been observed. Different green mortar mixes have been prepared using different percentages of waste glass powder (WGP), steel slag (SG) and silica fume (SF).The properties of flow, density, ultrasonic pulse velocity (UPV), compressive and flexural strengths have been tested for such green mortar in the first phase of the experimental work. The selected green mortar mix that gives good properties with the acceptable ranges of cement replacement by such cementitious materials has been utilized to achieve the second phase of the experimental work. Thus, the uses of human hair fibers, sisal fibers and stainless steel nails fibers in the form of individual and hybrid fibers system and testing for the same properties mentioned above have been performed. The third phase includes the cost estimation for the said mortar. Whereas, the last phase deals with analysis of the results using the integrated AHP and TOPSIS method for selection the best performance of the green mortar. The results of mono sisal fiber, human hair fiber and stainless nails fiber by 0.75, 0.75 and 2% of volume fraction respectively, exhibited the highest increase in compressive strength, flexural strength, UPV and density compared with other percentages.

Keywords