Case Studies in Thermal Engineering (Jul 2024)
Experimental investigation of photothermal performance in nanofluid-based direct absorption solar collection for solar-driven water desalination
Abstract
As the demand for energy continues to rise unabated, an examination of the constraints posed by finite fossil fuel reserves becomes crucial. There is need to explore and underscore the imperative shift towards renewable energy resources, where, solar energy is widely available and can readily be used in different applications, especially in water desalination applications. In the present research, photothermal performance of water based nanofluids containing graphene oxide (GO), zinc oxide (ZnO), iron oxide (FeO), and their composites (GO-ZnO and GO-FeO) have been studied under the natural sun to determine the potential for water desalination applications. All type of the nanofluid are prepared through a two-step method and are characterized morphologically using a scanning electron microscope (SEM). UV–visible spectroscopy is used to assess the optical absorbance of prepared nanofluids. The outcomes of this study show that pure GO nanofluids exhibited excellent absorption in the visible and near-infrared regions as compared to other nanofluids used in this research study, which makes them efficient nanofluids in converting solar energy into heat. For more assessment, a direct or volumetric solar thermal collector was used to evaluate the photothermal efficiency of water based nanofluids GO, ZnO, FeO, and their binary composites of GO-ZnO, and GO-FeO under natural solar flux at weight concentrations (0.01 wt%). The sensible heating efficiency due to the rise in temperature and latent heat of evaporation efficiency due to mass loss of nanofluid samples contributed towards photothermal efficiency. Pure GO nanofluids showed the highest photothermal efficiency, which is 71 % among all the nanofluids used in this study due to their carbon-based structure, highest optical absorption peak, excellent dispersion stability, and highest thermal conductivity. This experimental work also revealed that binary nanofluids containing composites of (GO-ZnO) and (GO-FeO) showed higher photothermal efficiency as compared to individual nanofluids ZnO and FeO except graphene oxide GO. According to the results and observation of this experimental work, pure GO-based nanofluids are potential candidates for direct absorption solar collection used in water desalination applications.
