e-Prime: Advances in Electrical Engineering, Electronics and Energy (Sep 2024)
A new relaying approach for protecting TCSC compensated transmission line connected to DFIG based wind farm
Abstract
In modern power systems, Thyristor Controlled Series Capacitor (TCSC)-compensated transmission lines are crucial in transporting bulk power from large wind farms. However, the performance of conventional distance relays is adversely impacted by the typical fault characteristics of the Doubly Fed Induction Generator (DFIG) and TCSC. To address this challenge, this paper presents a new relaying algorithm such as Complete Ensemble Empirical Mode Decomposition with Adaptive Noise-based Dominant Mode Algorithm-Hilbert Transform (CEEMDAN-DMA-HT) for fault detection and CEEMDAN assisted Enhanced Jaya Optimization-based Random Vector Functional Link Network (EJAYA-RVFL) for fault classification. In proposed fault detection algorithm, the differential current from both ends of the line is subjected to Complete Ensemble Empirical Mode Decomposition with Adaptive Noise, leading to the extraction of distinct intrinsic mode functions (IMFs). Employing the Dominant Mode Algorithm, the IMF with the highest Pearson correlation coefficient, referred to as the dominant IMF, is identified. Subsequently, a comparison between this dominant mode IMF and the original input signal is conducted after passing the obtained signal through the Hilbert Transform (HT), enabling effective fault detection. The proposed classifier leverages a straightforward feature set that quantifies the energy of each phase and the ground. These features serve as inputs for the proposed classifier, facilitating the categorization of different fault types. To evaluate the effectiveness of the proposed relaying algorithm, several fault and non-fault scenarios are simulated on a test power system using MATLAB/Simulink. The results demonstrate that; the proposed fault detection and classification algorithm are able to detect and classify faults in less than a half-cycle. The proposed method gives 100% fault accuracy for fault detection and 99.97 % accuracy for fault classification. Furthermore, the proposed classifier achieves the performance metrics like Precision (0.998), Recall (0.997) and F1-Score (0.996), providing quantitative insights into its accuracy and dependability. Finally, a comparative analysis is carried out with existing approaches.
