Frontiers in Materials (Jul 2020)

Corrosion Behavior of an Equiatomic CoCrFeMnNi High-Entropy Alloy- a Comparison Between Selective Laser Melting and Cast

  • Haoping Peng,
  • Zehuan Lin,
  • Ruidi Li,
  • Ruidi Li,
  • Pengda Niu,
  • Zhijian Zhang

DOI
https://doi.org/10.3389/fmats.2020.00244
Journal volume & issue
Vol. 7

Abstract

Read online

The corrosion behaviors of equiatomic CoCrFeMnNi high-entropy alloys (HEAs) were comparatively investigated between selective laser melting (SLM) and casting. The cast sample shows better corrosion resistance in 3.5 wt.% NaCl solution than the SLM printed sample due to the higher density of dislocations, pores, and cracks in SLM samples, which significantly reduces their corrosion resistance. Furthermore, it is found that the corrosion resistance is different between the planes parallel and perpendicular to the building direction of SLM sample because of the differences in grain orientation, grain size, and surface morphology. Electrochemical anode dissolution rates of the SLM printed CoCrFeMnNi HEAs on their planes parallel and perpendicular to the building direction are calculated and the results show that the pores and cracks dominate the corrosion resistance rather than the grain boundary and the grain orientation.

Keywords