Estimating the Thermal Conductivity of Unsaturated Sand

Abstract

A modified parallel model for estimating the thermal conductivity of unsaturated sand was proposed in this study. The heat conduction in the solid phase of sand depends mainly on the form of contacts between solid particles, while water bridges at the particle contacts increase the contact areas and remarkably enlarge the transfer paths of heat conduction in sandy soils. However, the thermal conductivity of the solid particle itself (λs) cannot describe the influence of the form of contacts and water bridges on heat conduction through the solid phase. In this study, the equivalent thermal conductivity of the solid particle (λes) was presented which reflected the influence of the form of contacts and water bridges between particles under dry conditions or a low degree of saturation, respectively. The relationship between λes and degree of saturation was described by hyperbolic expression. The modified model was calibrated using measured values of the thermal conductivity from published datasets, including those for 41 types of sand from 15 studies. Numerical analyses of the temperature field of the energy pile were performed and validated against laboratory measurements. The results illustrated that the modified model was more applicable than the original model for predictions of sand thermal conductivity.

Keywords

• sand thermal conductivity
• modified parallel model
• degree of saturation
• numerical analysis