Results in Control and Optimization (Jun 2024)
Intelligent Solar PV Grid Connected and Standalone UPQC for EV Charging Station Load
Abstract
The insertion of renewable energy sources into the grid, as well as the development of power electronics technology to regulate loads that are not linear, had an impact on power quality (PQ). This study focuses on the PQ enhancement of grid-connected and standalone solar PV systems (SPVS) with battery energy storage device (BESD) for the Electric vehicle (EV) charging station (EVCS) load in addition to the local load. Here, a hybrid control strategy that uses both the superior qualities of the sliding mode controller (SMC) and the fuzzy logic controller (FLC) is suggested for the unified power quality conditioner (UPQC's) shunt filter. It's major goal is to achieve steady DC capacitance voltage (SVDC) during load (like EVCS, non linear balanced/unbalanced etc.) and irradiation variations, diminish of total harmonic distortion (THD) in source current and load voltage, and mitigate sag, swell disturbances, and source voltage unbalances. The created model's performance is assessed using two scenarios (grid and island) under four case studies with varying combinations of loads and grid voltage circumstances. However, to establish the superiority of the proposed technology, comparative research with standard technologies such as proportional integral controller (PIC) and SMC controllers is required. THD is reduced by the proposed method to 2.25 %, 2.36 %, and 1.71 %, It is inferior to the current approaches found in the survey.