Balancing Performance and Portability: A Study on CsI(Tl) Crystal Sizes for Real-Time Gamma-Ray Spectrum and Dose Monitoring

Abstract

Current radiation dosimeters sometimes face accuracy limitations or provide only cumulative doses over long periods. To contribute to this area, we developed a portable monitor that measures the energy spectrum and dose of gamma rays in real time. To achieve this, we used an improved sequential Bayesian estimation algorithm. The dose rate was then derived from the energy spectrum by applying a flux-to-dose conversion coefficient. The monitor consists mainly of a CsI(Tl) scintillator and a multi-pixel photon counter (MPPC). In developing this device, we focused on striking a balance between measurement accuracy, ease of use, and portability. As an essential aspect of the research, we investigated the influence of the CsI(Tl) crystal size on the performance of the monitor to determine an optimal size. This was accomplished by calculating the detection efficiency and energy resolution through experimental measurements using standard gamma-ray sources and simulations using MCNP5. Within the scope of the research, detector response functions were created for each crystal size for an energy range of 10 keV to 3 MeV. Considering an optimal balance of detection efficiency and energy resolution alongside a compact size suitable for portable applications, the crystal measuring 2.6 × 2.6 × 1.3 cm3 was deemed preferable.

Keywords

• gamma spectroscopy
• scintillation detector
• CsI(Tl)
• occupational radiation exposure
• dose monitoring
• Monte Carlo