Effect of withdrawal rate on freckle formation of large-size directional solidified nickel-based superalloy blades

Abstract

The freckle formation and distribution in large-size directional solidified nickel-based superalloy blades at different withdrawal rates were investigated. The microstructure of freckles was analyzed by optical microscope (OM), and scanning electron microscope (SEM). The crystallographic orientation in the freckle regions was characterized by electron backscattered diffraction (EBSD). The solute segregation patterns on the surface of freckle regions were obtained by X-ray fluorescence (XRF). Numerical simulations for the temperature field were performed to analyze the mushy zone evolution during directional solidification. The experimental results indicated that the root region is prone to form freckles. The freckle chains were only distributed on the outward surface of the root region at low and middle withdrawal rates, and the inward side was free of freckles. When a high withdrawal rate was applied, a few freckles occurred on the inward side of the root region. The number and length of freckle chains increased as the withdrawal rate increased. The XRF results indicated that channel segregation formed on the surface of the root region. The segregation channels predicted by the macrosegregation simulation agreed well with the experimental observation. The concave or inclined solidification interface increased the propensity for freckle formation.

Keywords

• Freckle
• Directional solidification
• Nickel-based superalloy
• Macrosegregation