Numerical Study on Interfacial Structure and Mixing Characteristics in Converter Based on CLSVOF Method

Abstract

The blowing flow is a key factor in molten bath stirring to affects the steel-bath interface fluctuation and chemical reaction in the top-bottom-blowing converter. The Volume of Fluid (VOF) method is widely used to capture the gas-liquid interface. However, some limitations exist in dealing with the interface curvature and normal vectors of the complex deformed slag-bath interface. The Coupled Level-Set and Volume of Fluid (CLSVOF) method uses the VOF function to achieve mass conservation and capture interface smoothly by computing the curvature and normal vector using the Level-Set function to overcome the limitations in the VOF model. In the present work, a three-dimensional (3D) transient mathematical model coupled CLSVOF method has been developed to analyze the mixing process under different injection flow rates and bottom-blowing positions. The results show that when the bottom-blowing flow rate increases from 0.252 kg/s to 0.379 kg/s, the mixing time in the molten bath gradually decreases from 74 s to 66 s. When the bottom-blowing flow rate is 0.252 kg/s, it is recommended to distribute the outer bottom-blowing position on concentric circles with Dtuy,2/D2 = 0.33.

Keywords

• converter steelmaking
• numerical simulation
• multiphase flow
• CLSVOF model
• mixing time