Microstructure, properties and fracture mechanism of MAX phase Ti3AlC2 ceramics with Si doping via Ti–Al–C system by powder metallurgy

Abstract

The key problems restricting the wide development of Ti3AlC2 material are the low hardness and strength. In this paper, MAX phase Ti3(Al,Si)C2 solid solutions with different Si doping were successfully synthesized using an in-situ reaction of Ti–Al–C system by powder metallurgy route. The phase structures and microstructures of the as-synthesized Ti3(Al,Si)C2 solid solutions were analyzed, the mechanical properties were tested, and the fracture surface morphologies were characterized. The results show that doping Si can prevent the lath-like structure of MAX phase from coarsening. When doping 0.2 mol Si, the as-synthesized Ti3Al1.0Si0.2C2 sample offers fine microstructure and has excellent performance. Its Vickers hardness, flexural strength and the fracture toughness are 5.52 GPa, 546 MPa, 7.51 MPa m1/2, respectively. The fracture mode is transgranular cleavage fracture. During propagation, the main crack deflects and branches obviously. The crack extends in a zigzag like path, accompanied by transgranular fracture. When suffering external force, the particular layered structure of Ti3(Al,Si)C2 can absorbs and dissipates more energy through hybrid deformation modes such as extrusion, kink, fold, interlaminar separation and tearing. With this complex and mixed fracture mode, the crack propagation were effectively prevented, and its flexural strength and fracture toughness were enhanced.

Keywords

• MAX phase
• Ti3(Al,Si)C2 solid solution
• Si doping
• In-situ reaction
• Fracture mechanism