Long-range superconducting proximity effect in nickel nanowires

Abstract

When a ferromagnet is placed in contact with a superconductor owing to incompatible spin order, the Cooper pairs from the superconductor cannot survive more than 1 or 2 nm inside the ferromagnet. This is confirmed in the measurements of ferromagnetic nickel (Ni) nanowires contacted by superconducting niobium (Nb) leads. However, when a 3 nm thick copper oxide (CuO) buffer layer made by exposing an evaporated or a sputtered 3 nm Cu film to air is inserted between the Nb electrodes and the Ni wire, the spatial extent of the superconducting proximity range is dramatically increased from 2 to a few tens of nanometers. A scanning transmission electron microscope study confirms the formation of a 3 nm thick CuO layer when an evaporated Cu film is exposed to air. Magnetization measurements of such a 3 nm CuO film on a SiO_{2}/Si substrate and on Nb/SiO_{2}/Si show clear evidence of ferromagnetism. One way to understand the long-range proximity effect in the Ni nanowire is that the CuO buffer layer with ferromagnetism facilitates the conversion of singlet superconductivity in Nb into triplet supercurrent along the Ni nanowires.