Novel Use of Concentrated Solar Thermal Energy for Producing Highly Thermal Activated Materials for CCUS via Mineral Carbonation of Mine Waste

Abstract

An assessment of the levelised cost and associated CO2-eq emissions for the thermal activation of serpentine mine tailings to be used as activated feedstock for CCUS processes via mineral carbonation, is reported here for the first time. Two main technological scenarios were assessed, based on either direct fuel sources heating (natural gas and hydrogen) or indirect, CST-based heating with a back-up burner and storage to provide continuous operations, for a 200 ton/hr of processed ore and a targeted roasting ore temperature of 700°C. For CST-based systems, 3 different solar input scales, namely 50, 150 and 450 MWth, were considered, and simulations performed over a year timeline with a 10 minutes time step, using Mt Keith Nickel mine in Western Australia as the reference location. The analysis highlighted that the proposed CST-hybrid plant layout can achieve similar cost to that of fuel-only cases with current Australian fuel prices for natural gas and hydrogen, with lower CO2-eq emissions, and a parity cost with fuel-only scenarios of some 16 USD/GJ. The proposed CST-hybrid plant layout was also identified as the potential, preferred route over direct CST routes to achieve 24/7 continuous heat supply while retaining fine tuning of activation temperature, given a very narrow temperature window of activation for the chosen mine tailings for mineral carbonation processes.

Keywords

• Concentrating Solar Thermal Technology
• Techno-Economic Analysis
• Mineral Carbonation
• Carbon Capture
• Hydrogen