Comparison of radiant intensity in aqueous media using experimental and numerical simulation techniques [version 1; peer review: 1 approved, 2 approved with reservations]

Abstract

Background Measurement of light intensity reaching a point of interest in complex systems is a challenge faced by academia and industry. This study analyzes an optical ray tracing method to predict the radiant intensity reaching a point of interest in a germicidal system. Methods Implementation was performed by analyzing how the method compares with the discrete ordinate method, radiometry, and actinometry. This study further quantified the effect of the photoreactor quartz tube on the measured intensity for multiple wavelengths. Results Light intensity losses were estimated to be 10 ± 0.5% for the FX-1 265 source. In contrast, the simulation in a water medium showed an increase of up to 64% in the light intensity delivered to the central part of the tube owing to internal reflections and scattering. Model predictions from ray tracing were successfully compared with the discrete ordinate method (DOM) and experimental data (within ± 6%), ensuring the accurate design of complex systems for water disinfection. Conclusions The data from simulations address the challenges faced in complex radiation modeling and demonstrate that the method can be utilized as a useful tool for optimization and prediction.

Keywords

• actinometry
• discrete ordinate
• optical design
• radiometry
• ray tracing
• ultraviolet light
• eng