Comparison of Single and Dual Coherent Blades for a Vertical Axis Carousel Wind Rotor Using CFD and Wind Tunnel Testing

Abstract

This paper focused on the investigation of the blades for a carousel rotor of a wind turbine with a vertical axis. Cross sections of the single coherent (SC) and the dual coherent (DC) blades were compared in terms of the aerodynamic forces and aerodynamic torque generated during rotor operation for various wind attack angles. The design of the DC blade is novelty proposed by the authors. The main objective of the study was to determine the influence of the blade cross-section on the propelling torque of a wind turbine with three blades, which is an important parameter for rotor starting. First, experimental studies were carried out in a wind tunnel for real-size blade models. A CFD analysis of the airflow around the blades was then conducted. The obtained results were used to evaluate the suitability of applying the studied blade types in the design of the carousel wind rotor. The assessment compared the drag force and the lift force as well as aerodynamic torque as a function of a wind attack angle. It was concluded that the rotor with three DC blades involved mainly the drag force in contrast to the rotor with three SC blades that also involved the lift force to a greater extent. Despite the rotor with DC blades obtained greater values of the drag forces on the blades, the rotor with SC blades obtained a greater starting torque.

Keywords

• CFD simulation
• wind tunnel testing
• blade cross-section