Numerical Study of Stress-Strain State of Workpiece in Contact Problem of Surface Mandrel Drilling

Abstract

In recent years, the economic factor has played an increasingly important role in the selection of technologies for manufacturing machine parts with specified values of normalized parameters of geometric accuracy and quality of working surfaces. As applied to surface plastic deformation processes, this is noticeably manifested in the search for effective friction control methods in the “tool – workpiece” pair, which ultimately determines the distribution pattern and the magnitude of stresses and strains in the workpiece and the tool. It is not possible to obtain a rigorous analytical solution to the problem of establishing a connection between surface conditions, friction, and the stress-strain state of the contacted bodies. In this regard, the construction of mathematical models comes to the fore, the solution of which is possible by numerical methods. The paper presents the results of a numerical study (computational experiment) of a finite-element model of workpiece deformation under various conditions of contact interaction and friction by one of the methods of surface plastic deformation – surface mandrel drilling. The friction coefficient has been chosen as the criterion for assessing the conditions of contact interaction and friction. It is shown that a change in the friction coefficient in the process of surface mandrel has no noticeable effect on the formation of a stress field in the deformable workpiece both in the axial, and in the radial and circumferential directions. At the same time, with an increase in the value of the friction coefficient in the “tool – workpiece” pair and with the associated increase in the force of mechanical resistance to deformation of the workpiece, their growth is observed. A computational experiment has confirmed the presence of non-contact deformations of the workpiece and tool during surface mandrel drilling, as well as as a decrease in the value of residual deformations in the workpiece with a decrease in the coefficient of friction. Balance assessment of contact surface displacements in the workpiece (the inner surface of the hole to be machined) and the tool (mandrel) has shown that the deformations of the tool in the elastic region can lead to a significant decrease in the real tightness of surface mandrel drilling.

Keywords

• tool
• workpiece
• surface deformation
• mathematical model
• friction
• stresses
• strains
• surface mandrel