Variations in the physical and mechanical behavior of basalt fiber reinforced NHL mortars exposed to different curing conditions

Abstract

This paper investigates experimentally the short-term behavior of natural hydraulic lime (NHL) mortars reinforced with ballast fiber for use as structural repair mortars in historic and contemporary buildings. The physical and mechanical properties of mortar mixes reinforced with 0.143–0.215 mm equivalent thick and 12 mm long fibers in volumetric percentages of 1 %, as well as of unreinforced mortars, produced with different compaction methods and cured under different environmental conditions, have been evaluated. A cost-effectiveness analysis has also been carried out to determine the economic impact of these factors in their practical application. It is found that basalt fiber reinforcement provides lower water absorption coefficients and significantly improves the shore hardness, compressive strength, and post-critical flexural behavior of NHL mortars at early ages. Furthermore, it is observed that the compaction procedure can improve the packing density of the mortars providing higher densities, lower water absorption coefficients and higher mechanical strength values. Finally, it is verified that the curing parameters affect unevenly the basalt fiber reinforced NHL mortars and unreinforced NHL mortars, with greater deterioration being observed in the former when sufficient moisture is not ensured. Decreases in hardness, flexural and compressive strength, as well as increases in the water absorption coefficient are important. Consequently, the economic profitability of basalt fiber reinforcement depends on ensuring optimal moisture conditions during curing, especially when the mixes have already lost excess water after the first 2–3 days. The study provides quantitative and qualitative data to determine the appropriate curing parameters for basalt fiber reinforced NHL mortars that are viable in practice for their industrial performance.

Keywords

• Rehabilitation
• NHL mortars
• Basalt fiber-reinforced NHL mortars
• Compaction method
• Curing conditions