Biomechanical analysis of fibular graft techniques for nontraumatic osteonecrosis of the femoral head: a finite element analysis

Abstract

Abstract Background Free vascularized fibula graft (FVFG) techniques have most consistently demonstrated beneficial effects in young patients diagnosed with nontraumatic osteonecrosis of the femoral head (NONFH), and the core track technique (CTT) in particular is the most commonly used technique. As an alternative to CTT, the modified light bulb technique (LBT) has been reported to have a higher success rate. However, its biomechanical outcomes are poorly understood. This study aimed to compare the biomechanical properties of modified LBT with those of CTT in treating NONFH. Methods Two types (C1 and C2) of NONFH finite element models were established on the basis of a healthy subject and the Japanese Investigation Committee (JIC) classification system, and the CTT and LBT procedures were simulated in each type of model. The average von Mises stresses and stiffness of the proximal femur were calculated by applying a load of 250% of the body weight on the femoral head to simulate walking conditions. In addition, two patient-specific models were built and simulated under the same boundary conditions to further validate the LBT. Results In the healthy subject-derived models, both the LBT and CTT resulted in reduced stresses in the weight-bearing area, central femoral head, femoral neck, and trochanteric and subtrochanteric regions and increased structural stiffness after surgery. In the weight-bearing area, the CTT reduced the stress more than the LBT did (36.19% vs 31.45%) for type C1 NONFH and less than the LBT did (23.63% vs 26.76%) for type C2 NONFH. In the patient-specific models, the stiffness and stresses also increased and decreased, respectively, from before to after surgery, which is consistent with the results of healthy subject-derived models. Conclusion The biomechanical effects of the LBT and CTT differ by the JIC type of NONFH. In terms of preventing the collapse of the femoral head, the LBT may be more effective for JIC type C2 NONFH and may be a suitable alternative to the CTT, while for JIC type C1 NONFH, the CTT is still a better choice. Both techniques can improve the biomechanical properties of NONFH by reducing the proximal femoral stress and increasing the structural stiffness.

Keywords

• Osteonecrosis of the femoral head
• Free vascularized fibula graft
• Surgical techniques
• Finite element analysis