Simultaneous enhancement of strength and ductility of Al matrix composites enabled by submicron-sized high-entropy alloy phases

Abstract

Our study investigated the reinforcing effect of submicron-sized (100–500 nm) Al0.5CoCrCuFeNi high-entropy alloy particles (HEAps) on the tensile properties of Al matrix composites. The HEAps were refined to the submicron-sized level via a thermal plasma process to maximize reinforcing efficiency by increasing specific surface (i.e., interface) area. The Al/HEA composites were produced by hot rolling of mechanically milled Al/HEA composite powder. The microstructural analysis demonstrated that the HEAps were uniformly dispersed within the Al matrix by forming a sound interface without interdiffusion brittle intermetallic layers or any noticeable voids. Moreover, the addition of 2 vol% HEAps resulted in a simultaneous increase in both yield strength from 355 to 403 MPa and tensile elongation from 1.3 to 3.3%. As a result, the composite experienced a synergistic effect due to the combination of intrinsic strengthening to promote uniform plastic deformation and extrinsic strengthening to mitigate plastic instability and crack propagation.

Keywords

• Aluminum matrix composite
• High-entropy alloy particle
• Powder metallurgy
• Strengthening behavior
• Interfacial bonding