Calculation of a beam on an inhomogeneous basis

Abstract

The questions of analytical calculating the beam on the base with the modulus of deformation (modulus of elasticity), which is changed by thickness of the layer by power law, was deals in the article. The purpose of work was receiving finite expressions for reactive pressure of the basе on a beam and internal efforts in a beam when using model of the base with two characteristics (coefficient of subgrade resistance). A system of differential equations second-order with respect to the displacements of points the surface of a layer with a continuously changing modulus of elasticity was obtained based on the minimum of the total potential strain energy. The calculation of the rigid beam on the base on the action of the symmetric load was performed and the formulas for the reactive pressures of the base were got. Numerical calculation is executed and the analysis of influence of change of the module of deformation of a layer by the amount of reactive pressure and the bending moment in a beam was given. It is shown that with increase in the module of deformation on layer thickness the basе with two characteristics on nature of work is approaching vinklerovsky.