Braid Angle and its Influence on the Hydraulic Hoses Behaviour Under Pressure Loading

Abstract

This paper deals with the experimental analysis of the effect of the braid angle on the behaviour of a hydraulic hose under pressure loading. The main structural elements of the hose are a rubber tube and a steel braid or spiral. The material of the braid and the number of braids influence the magnitude of the pressure load on the hydraulic hose. The angle of the braid affects the deformation of the hydraulic hose when the inner wall is loaded with fluid pressure. For hydraulic hoses, it is a requirement to maintain a neutral braid angle during manufacture to ensure a balance between axial and circumferential stresses under pressure loading. An experimental device was set up to measure the hoses. This device can be used to measure the diameter of the outer braid, the length and the tensile force of the hose in the axial direction and, where appropriate, to evaluate the angle of the outer braid of the hose as a function of the fluid pressure loading on the inner wall of the hose. The object of the research is to determine the effect of the braid angle on the behaviour of the hydraulic hose under pressure loading. Based on the measurements, the dependencies of the tensile force, the braid angle and the change in length of hydraulic hoses on the internal pressure were determined. In order to compare the measurement results, hydraulic hoses with different inner diameters and different numbers of braids or spirals were selected. Research background: Description of neutral braid angle, hydraulic hose geometry, tensile force of hose. Purpose of the article: Influence of braid angle on the hydraulic hoses behaviour under pressure loading. Methods: Experimental measurements. Findings & Value added: Determining of the change of length dependencies on the pressure, determining of the tensile force dependencies on the pressure.

Keywords

• hydraulic hose
• braid angle
• tensile force
• pressure loading