Scientific Reports (Sep 2024)

Biosorbent treatment of fluorene using activated carbon derived from the pyrolysis process of date pit wastes

  • Tarek O. Said,
  • Badriah S. Al-Farhan,
  • Sara A. El-Ghamdi,
  • Nasser Awwad

DOI
https://doi.org/10.1038/s41598-024-72127-2
Journal volume & issue
Vol. 14, no. 1
pp. 1 – 10

Abstract

Read online

Abstract Activated carbon (AC) derived from Date pits (DP) wastes was used as an eco-friendly and effective biosorbent for the removal of fluorene (FLU) from organic wastes. The maximum capacity of DP was 6.71 mg g−1, compatible with the Freundlich model. FLU adsorption's chemisorption performance on DP was involved in following a superior linear fit for the pseudo-2nd-kinetic model. The maximum adsorption capacity from the pseudo-2nd order kinetic model fitted with the experimental findings and found to be 3.73 g, 2.62, 1.13, 0.955, 0.749, 0.591, and 0.665 mg g−1 at 25, 3, 35, 4, 45, 5 and 55 °C, respectively. The negative value of the spontaneous nature of the adsorption corresponds to the exothermic nature however, + ΔS corresponds to an increase in the degree of freedom for FLU adsorption. The relatively high value of activation energy (Ea) demonstrates that the adsorption of FLU onto DP is classified as chemical adsorption, and found to be 84.8 kJ mol−1. Also, the result of XRD shows that the prepared DP was re-used four times without substantially decreasing performance. In addition, it appears that AC prepared from DP is a promising adsorbent with a low cost for removing many organic pollutants.

Keywords