Analysis and Design of Nonlinear Tuned Mass Damper Based on Complex Variable Averaging Method

Abstract

As one of the most representative passive control devices, tuned mass dampers (TMDs) are widely used in civil engineering, aerospace, machinery, and other fields, after years of research and improvement. However, due to their large displacement and the use of a limiting device, they inevitably exhibit some nonlinear characteristics in practical engineering applications. This nonlinearity is often ignored; however, neglecting it in the design process can adversely affect the control performance. Therefore, considering the nonlinearity of a TMD while designing TMD parameters can make the calculation results closer to reality and benefit the structural design. In this paper, we derived the approximate analytical solution of TMD amplitude using the complex variable averaging method by considering the nonlinearity generated by a TMD in the vibration process. Theoretical optimal design parameters were obtained by analytical comparison, and we compared the computational time consumption of this method and the numerical method. The results showed that the optimized parameters of the TMD obtained by nonlinear design possessed a good vibration reduction effect both before and after the TMD generated nonlinear characteristics. Additionally, the complex averaging method generated frequency response curves tens of times faster than the numerical method.

Keywords

• tuned mass dampers
• nonlinear characteristics
• vibration control
• approximate analytical solution
• parameter design