Removal of contaminants in paper dyeing wastewater by Fenton and photo-Fenton processes with biological treatment

Abstract

Due to the production of huge quantity of potentially toxic and recalcitrant pollutants, which cannot be completely decomposed with conventional biological wastewater treatment processes, in the paper industry, reliable treatment processes are highly required. This study conducted effective experiments of different series of processes to decompose persistent contaminants in the paper wastewater under controlled conditions of the used processes to meet the effluent quality standards of Korea Ministry of Environment in terms of CODMn (< 130 mg/L). For Biological treatment, Fenton, and photo-Fenton processes, various operational parameters were adjusted to determine the optimal conditions for CODMn value. Due to large quantity of refractory contaminants in the wastewater, single treatment process was not enough to meet the requirement of CODMn. Herein, we achieved the goal with two approaches: (1) secondary Fenton oxidation after biological and primary Fenton treatments, and (2) photo-Fenton treatment after biological treatment alone. The secondary Fenton oxidation process is an additional process operated under the same condition of the primary Fenton treatment to treat the effluent from the primary Fenton treatment. Ultimately, the residual CODMn concentrations of the secondary Fenton and single photo-Fenton treatment were 62.7 and 85.3 mg/L, respectively. However, the secondary Fenton required larger amounts of reagents and produced significant amounts of sludge, which require post-treatment, compared to single photo-Fenton treatment. Therefore, it suggests that the application of photo-Fenton was more efficient than the secondary Fenton in terms of economic feasibility and post-treatment requirement.

Keywords

• Paper industry effluent
• Fenton oxidation
• Photo-Fenton process
• Anoxic/oxic process
• Chemical oxygen demand