A Scale Factor Calibration Method for MEMS Resonant Accelerometers Based on Virtual Accelerations

Abstract

This paper presents a scale factor calibration method based on virtual accelerations generated by electrostatic force. This method uses a series of voltage signals to simulate the inertial forces caused by the acceleration input, rather than frequent and laborious calibrations with high-precision instruments. The error transfer model of this method is systematically analyzed, and the geometrical parameters of this novel micromachined resonant accelerometer (MRA) are optimized. The experimental results demonstrate that, referring to the traditional earth’s gravitational field tumble calibration method, the error of the scale factor calibration is 0.46% within ±1 g by using our method. Moreover, the scale factor is compensated by virtual accelerations. After compensation, the maximum temperature drift of the scale factor decreases from 2.46 Hz/g to 1.02 Hz/g, with a temperature range from 40 °C to 80 °C.

Keywords

• accelerometer
• calibration
• virtual accelerations
• comb-drive actuators