Utilization of carbon nanotubes and steel fibers to improve the mechanical properties of concrete pavement

Abstract

Abstract Background Rigid pavements have become an urgent demand in recent years, as these pavements need less maintenance and renovation than other types. However, traditional rigid pavement faces various challenges and difficulties over its lifetime. It has a much higher initial erection cost than asphalt pavements, a greater sensitivity to dynamic stresses, and a highly susceptible to temperature variations causing cracking. Previous works dealt with these drawbacks by using effective materials as alternatives to cement and/or aggregates in pavements mixtures. In the last few years, much interest has been carried out in nanomaterial applications to improve the mechanical performance of construction materials, which can also be used for rigid pavement constructions. This improvement is due to nanomaterials' role in concrete as nanoreinforcements and nanofillers. On the other hand, various types of fibers have been used to improve the performance of concrete constructions. This study investigates the effect of adding carbon nanotubes (CNTs) and steel fibers (SFs) to concrete mixtures. A series of experiments on concrete mixes with various weight percentages of CNTs (0%, 0.025%, 0.050%, and 0.075%) were added to the mixtures to determine the best cost and amount of CNTs to add to a concrete mix. Compressive, tensile, and flexure strength characteristics are investigated. In the second experimental stage of this work, the effect of adding steel fibers to the mixture was investigated. Results According to the results, the optimal carbon nanotube content in concrete is 0.05%. Compared to other concrete combinations with varying proportions of CNTs, this quantity offers the maximum compressive, tensile, and flexural strength. Additionally, SFs can improve the mechanical properties of the mix as well as enhance its post-cracking and fatigue behavior. Adding both CNTs with SFs increased compressive, tensile, and flexural strength by 22.7%, 29.3%, and 70.8%, respectively, more than the traditional pavement. Conclusion This work found that combining SFs with CNTs improves the mechanical properties of the concrete mortar, resulting in a stronger mortar that can withstand more loads than the traditional one.

Keywords

• Rigid pavement
• Concrete pavement
• Carbon nanotubes (CNTs)
• Steel fibers (SFs)