pH-Driven Selective Adsorption of Multi-Dyes Solutions by Loofah Sponge and Polyaniline-Modified Loofah Sponge

Abstract

In the last decades, sorbent materials characterized by low selectivity have been developed for the removal of pollutants (in particular dyes) from wastewater. However, following the circular economy perspective, the possibility to selectively adsorb and desorb dyes molecules today represents an unavoidable challenge deserving to be faced. Herein, we propose a sequential treatment based on the use of PANI-modified loofah (P-LS) and loofah sponge (LS) to selectively adsorb cationic (rhodamine, RHB, and methylene blue, MB) and anionic (methyl orange, MO) dyes mixed in aqueous solution by tuning the adsorption pH (100% MO removal by P-LS and 100% and 70% abatement of MB and RHB, respectively, by LS). The system maintained high sorption activity for five consecutive cycles. A simple and effective regeneration procedure for the spent adsorbents permits the recovery of the initial sorption capability of the materials (81% for MO, ca. 85% for both RHB and MB, respectively) and, at the same time, the selective release of most of the adsorbed cationic dyes (50% of the adsorbed MB and 50% of the adsorbed RHB), although the procedure failed regarding the release of the anionic component. This approach paved the way to overcome the traditional procedure based on an indiscriminate removal/degradation of pollutants, making the industrial wastewater a potential source of useful chemicals.

Keywords

• dyes
• polyaniline
• loofah
• adsorbents
• water remediation
• easy recovery